[VAIO_PC] How to enable Intel Virtualization Technology functions

About enabling Intel Virtualization Technology function.  Set up from BIOS setup menu.

Applicable products
All VAIO product Models compatible with Intel Virtualization Technology
 
Table of Contents
Pre-check
Operation
 
Pre-check
This function can only be used if the hardware such as the CPU is compatible with Intel Virtualization Technology.
 
Operation
The displayed screens may differ on different models.

1. Turn on the computer while pressing the F3 or F4 key.

2. When the VAIO Rescue Mode screen is displayed, select “Run BIOS setting” or “Display BIOS Setting Menu”.

3. Press the → key and bring up the Advanced tab.

4. Check “Intel(R) Virtualization Technology”. If it is disabled, press Enter. If it is enabled, please proceed to step 5.  If the hardware is not compatible with Intel Virtualization Technology function, “Intel(R) Virtualization Technology” will not be displayed.

5. Press the ↓ key, select “Enabled” and press “Enter”.

6. Press the → key, and display the Exit tab.

7. Press the ↓ key and select “Save Changes” and press “Enter”.

8. A message such as “Save configuration changes now?” will be displayed. Select “Yes” and press “Enter”.

9. Press the ↑ key, select “Exit Setup”, and press Enter.

10. A message such as “Save configuration and reset?” or “Save configuration changes and exit now?” will be displayed. Select “Yes” and press “Enter”.
 
Operation is now complete.